Audit Profile - If an audit profile is selected, events such as SMS messages and acknowledgements will be stored to the audit system. Inductive automation ignition 7.2.11 sms code#
Numeric Only Ack Code - If this is true, the ack code sent with the SMS message will be a numeric code instead of an alphanumeric code.This is communicated to Ignition via UDP data sent from the modem. Therefore, the Airlink modem must be configured with the IP address of the system. Two-way Enabled : If enabled, the message recipients will receive a text message notifying them of an alarm, and a link to acknowledge the alarm.
Receive Port : The default port is 17342, which is the port used by Ignition when two-way messaging is enabled. The port must not already be used by the host system, and must not be blocked by a firewall. Send Port : The default port is 17341, which is configured in the device. Airlink Host Add ress : The IP address of the airlink modem. Enabled box: Click to Enable SMS notifications. Set the following settings concerning your device, and then click on Create New Alarm Notification Profile. Select the SMS Notification profile type and click Next. On the Alarm Notification Profiles page, click on Create new Alarm Notification Profile. Scroll down to Alarming > Notification from the menu on the left. Go to the Config section of the Gateway Webpage. If you want to use two-way messaging (incoming and outgoing), then only one Ignition system can receive those incoming responses. You can use one SMS modem with multiple Ignition systems for one-way (outgoing) messaging. To learn more, refer to the Knowledge Base article by clicking the link on the right side of this page.įor more information about The AirLink® LS300, see: įor more information about The AirLink® RV50, see: įor more information about The AirLink® RV55, see: Multiple Systems with One Modem 
You can do the basic configuration for the Airlink modem by importing a template settings file provided by Inductive Automation. Most devices from most manufacturers that support the Airlink IP protocol can be used, but some configuration settings might be different. Inductive Automation officially supports five Airlink Devices: the RV50/RV50X, RV55/RV55X, the Raven XE, the LS300, and the LX40. You must have both modules installed to send alarms. Note: The SMS Notification Module is dependent on the Alarm Notification module.
0 kommentar(er)
